Briggs & Stratton 040213 Manual do Operador descarregar pdf (Página 6)

INSTALLATION

You may also lift the unit using a “hook and hoist” method

attached to the lifting pipes, provided that you use a

spreader bar to ensure that the chains or cables do not

touch the generator’s roof.

After unit is in place, fill the lifting holes with the supplied

lifting hole plugs.

Access Doors

The Home Generator System is equipped with an

enclosure that has three access doors (Figure 4).The doors

are named for a significant component located behind

them. Starting with the side that has the fuel connection

and proceeding clockwise, the doors are named:

• Oil Fill door

• Control Panel door

• Oil Drain door

Each Home Generator System is equipped with two identical

keys.These keys fit the locks that secure the access doors.

To Open an Access Door:

1. Insert key into lock of access door you wish to open

and turn one quarter turn counterclockwise.

2. Grasp door’s handle and turn one quarter turn

counterclockwise to open. Remove key.

To Close an Access Door:

1. Close door and turn doors handle one quarter of a

turn clockwise.

2. Insert key into lock of access door and turn one

quarter turn clockwise. Remove key.

To lift: Insert

pipe here

Installer-supplied pipe

Figure 3 — Location of Lifting Holes

Oil Fill Door

Fuel Inlet

Exhaust

Port

Control Panel Door

Oil Drain Door

Exhaust Bulkhead

Figure 4 — Enclosure Access Doors

• DO NOT touch hot surfaces.

• Allow equipment to cool before touching.

Running engines produce heat.Temperature of

exhaust port and nearby areas can reach or

exceed 600°F (316°C).

Severe burns can occur on contact.

WARNING

1 2 3 4 5 6 7 8 9 10 11 ... 47 48

Comentários a estes Manuais

Sem comentários

Briggs & Stratton 040213 Manual do Operador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Geradores de energia Briggs & Stratton 040213