Briggs & Stratton MS-6445-01/03 Instruções de Operação descarregar pdf (Página 8)

Maintenance

Remove dirt and debris with a cloth or brush.Clean-

ing with a forceful spray of water is not recom.

mended as water could contaminate the fuel sys-

tem.

CAUTION: To assure smooth Operation,

keep rack and pinion controls, governor

linkage and springs free of debris.

,_ CAUTION: Periodically clean muffler area

to remove all dirt and combustible debris.

Replace In-Line fuel filterevery 100 hours or every

season, whichever occum first. Contact any Briggs

& Strarlon Authorized Service Center for correct re-

placement.

FUEL FILTER

REPLACE OR CLEAN SPARK PLUG:

Replace or clean after every 100 hours of operation

or every season, whichever occurs first.

,030"(,76turn)

j , EEL RQAU E

SPARK PLUG

NOTE: Do not blast clean spark plug. Spark plug

should be cleaned by scraping or wire brushing and

washing with a commercial solvent.

,_ CAUTION: Sparking can occur if wire ter-

minaldoes not fit firmlyon spark plug, Re.

form terminal it necessary.

CLEAN SPARK ARRESTER SCREEN:

!f engine muffler is equlpped with spark srre_"_

screen assembty, remove every 50 hours or e\|i:

season, whichever occurs first, 1orcleaning snd_,:>

spection. Replace if damaged. Contact any Briggs &

Stratton Authorized Service Center.

REMOVE COMBUSTION DEPOSITS;

Remove cylinder head every 100-300 hours el op-

eration. Scrape and wire brush the combustion de.

positsfrom cylinder, cylinder head, top of piston and

around valves. Reassemble gasket and cylinde_

head, Turn screws down finger tight with fhre{

tongarscrews around exhaust valve, ifso equipped

Torque cylinder head screws in a staggered se

quence to 165 In,-Ibs. (19 Nm).

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Briggs & Stratton MS-6445-01/03 Instruções de Operação Página 8